Publicité
COLOR ALARM CLOCK
Thank you for purchasing a Keytime product. We hope that you will be completely satisfied with it.
PACKAGING CONTENT
• A color alarm clock
• A USB charge cable
• A USB power adapter (DC 5V / 1.2A)
• A user manual
WARNINGS & SAFETY INSTRUCTIONS
Safety Instructions
This manual will help you to familiarize yourself with the operation of the product. Keep it in a safe place for
future reference.
• Never immerse your alarm clock in water or any other liquid.
• Do not attempt to disassemble or reassemble your alarm clock.
• Do not use any cleaning products containing alcohol, ammonia, benzene or abrasive substances.
• If cleaning is necessary, use a soft cloth, dampening it with a small amount of water or water and mild soap
as needed.
• When the alarm becomes fainter, insert new batteries.
• If the battery has leaked, avoid contact with the skin, eyes and mucous membranes, and immediately rinse
the affected areas and seek medical attention.
• If you do not use the alarm clock, remove the battery to avoid leakage that could damage the device.
• This product is not a toy. If swallowed, batteries can cause fatal poisoning. Keep your alarm clock, the
packaging and the batteries out of the reach of children. If you suspect that your child may have swallowed a
battery, seek medical attention immediately.
Warranty
The products are guaranteed against any failure resulting from a manufacturing defect. This warranty does not cover defects
due to misuse or normal wear and tear. Please keep your invoice carefully stapled to this guide.
Ref: KT054567
PRODUCT USE
PRODUCT USE
1. Plug the USB adapter into an AC household outlet and plug the DC jack into the back of the unit.
2. Insert 2 x AAA batteries (not included) into the battery compartment to provide backup power to the clock
in the event of a temporary power interruption.
Time setting
Scroll the dimmer knob to adjust the brightness of LED display.
Please make sure the dimmer knob is on High (+) before plugging in the
clock, otherwise the display would be too dim.
Alarm setting
2023/0801/MKG
1. Press and hold the Time-Set for 2 seconds to enter into time-setting mode,
the hour digits flash.
Press +/- button to set the current hour (hold to advance rapidly).
2. Press Time-set button again, the minut digits flash.
Press +/- button to set the minutes.
3. Press Time-Set button again, save and exit the time-setting mode.
4. Press the Time-Set button to change the 12/24 Hr time format, the
corresponding AM-PM icon will be light on/off.
1. Press and hold Alarm-Set button for 2 seconds to enter into the alarm-setting
mode; the hours digits flash.
Press +/- button to set the hour (hold to advance rapidly).
2. Press Alarm-Set button again; the minutes digit flashes.
Press +/- button to set the minutes.
3. Press Alarm-Set again to save and exit the alarm-setting mode.
SRDi - 85430 La Boissière des Landes FRANCE
Publicité
