Publicité
Final Steps
1� Check all holes to make sure that hole plugs and screws arein
place and are fully tightened�
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet�
Do not remove ground prong�
Do not use an adapter�
Do not use an extension cord�
Failure to follow these instructions can result in death, fire,
or electrical shock�
2� Plug into a grounded 3 prong outlet�
NOTE: Allow refrigerator to stand upright at least 2 hours
before plugging in�
3� Return all removable door parts to door and food to refrigera-
tor�
NOTE: Wait at least 24 hours for your refrigerator to cool com-
pletely before adding food� If you add food before the refrigera-
tor has cooled completely, your food may spoil�
A. Hinge plug
Install Door Handles
(on some models)
On some models the door handles are factory-installed� If your re-
frigerator does not have factory-installed handles, see the following
instructions�
IMPORTANT: If you want to reverse the direction of the door swing,
so that the freezer and refrigerator doors open from the opposite
side, see "Reverse Door Swing" before installing the door handles�
Parts Supplied: The door handles are packed inside the freezer
compartment, and the Reversibility kit containing the screws and
hole plugs is in the crisper drawer in the refrigerator compartment�
Parts
■
Door handles (2)
■
Handle screws (4)
■
Handle plugs (4)
Gather the required tools�
Tools Needed: Phillips screwdriver
Install Handles
1� Remove the door handles from the packaging� Remove the-
screws and hole plugs from the Reversibility Kit�
2� Using the screws, fasten the handles to the doors�
3� Insert the handle plugs to cover the screws�
Location
Freezer compartment
Crisper drawer
Crisper drawer
11
Publicité
