Publicité
■ Protect the device from: impacts, fire and
other heat sources, persistent sunlight
and moisture.
■ Do not place heavy objects on the device
or the connecting cable.
USE
Please Note!
■ Inspect the device for damage each time
before you use it. The device should only
be used if it has been fully assembled, is
undamaged and in working order!
■ Only connect the device to a plug socket
that is properly installed. The plug socket
must be readily accessible so that the
connection to the mains can quickly be
isolated. The mains voltage must match
the technical data of the device.
■ Lay the connecting cable so that it is not
squashed, bent or laid over sharp edges
and does not come into contact with
hot surfaces.
■ Do not operate without water!
1. Place the egg cooker on the kitchen unit
or another work surface that is dry, flat
and water-resistant.
2. Depending on the hardness level you
want, fill the measuring cup up to the
appropriate mark with water:
hard boiled egg
medium boiled egg
soft boiled egg
L
The marks on the measuring cup
merely give guidelines for 2 eggs.
The amount of water required for
the hardness level you want may
vary slightly depending on the
number, size of the eggs and the
temperature they are stored at. If
there is just one egg, the amount of
water should be increased slightly.
If the eggs have become too soft,
more water is required. If the eggs
are too hard, the amount of water
should be reduced.
3. Pour the water from the measuring cup
into the heating bowl.
4. Place the insert on the heating bowl.
5. Prick the egg(s) at the blunt end with
the egg pricker (on the bottom of the
measuring cup) so that they do not burst
open when they are boiled ( Picture B).
6. Place the egg(s) in the insert and put
on the lid.
7. Fully unwind the connecting cable
and plug the mains plug into the plug
socket.
8. To switch on the egg cooker, press the
On / Off button. The operating lamp
starts to light up and indicates that the
heating bowl is heating. The water is
brought to the boil.
L
The boiling process can be stopped
at any time by pressing the On / Off
button again.
EN
13
Publicité
