Publicité
concerning use of the appliance in safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
8.Children should be supervised to ensure that they do not play with the
appliance.
9.If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
10.CAUTION – Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and vulnerable
people are present.
I. Product introduction
The electrical oil heaters, made of advanced equipment and process seiko,
are generous in shape, excellent in performance, simple in operation, safe in
use and efficient in heat utilization. They use special heat conducting oil as
heat conducting medium, diffuse heat through heat sinks and heat air, thus
creating a warm working and living environment for you in cold winter to
make you feel more comfortable and warm!
II. Performance characteristics
1. Large heat dissipation area, uniform heat dissipation, low surface
temperature and good constant temperature performance.
2. No noise, no odor, no open fire and good safety performance.
3. The mechanical type is controlled by touch panel which is simple and
convenient to operate and has the functions of power selection and
temperature regulation, etc.
4. Omni-directional wheel design for easy movement.
III. Technical parameters
Model
Specification
ES10374US
7 fins.
IV. Packing list
Name
Electrical oil heater body
Qty
1 set
04
Voltage
Frequency
Rated power
110-120V
60Hz
1500W
Baseboard
Caster
2 pcs.
4 pcs.
V. Product structure diagram
Control panel
Power button
Cord box
VI. Method of use
1. Open the packing box, take out the body and confirm whether the product
is intact.
2. Before use, please make sure that the rated voltage of the power socket
is 110-120V AC, the rated current is greater than 15A and there is a reliable
and safe grounding device.
3. The electrical oil heater can only be used after the casters are properly
installed. Refer to Caster Installation Method.
4. Method of using the type:
(1) Turn on the switch on body ,press the heating key,and press "+" and "-" to
adjust the temperature you need.
(2) When your room reaches the desired temperature, the machine will stop
to heat up. As soon as the room temperature has dropped below the set
temperature, the unit will switch it self on automatically until the set
temperature has been reached again. In this way the room temperature
remains constant with the most economical use of electricity.
Electric oil heater
Baseboard
Caster
05
Publicité
