DrBrowns Formula Mixing Pitcher Mode D'emploi page 3

Mixing Instructions
1. Remove the locking lid with mixing blade.
2. Always follow the formula manufacturer's instructions for mixing water and formula.
3. Slide the locking ring on the spiral post until it locks at the desired notch on the spiral
post. Be sure to select a notch that keeps the mixing blade below the surface of the
liquid at all times.
Note: Selecting the correct notch is important to ensure the mixing blade
remains below the surface of the liquid to prevent introducing excess air.
4. Affix locking lid to the pitcher. The lid has Open and Closed/Mix positions.
It should be in the Closed/Mix position for formula preparation.
5. Begin mixing by pumping up and down on the mixing handle with smooth strokes,
(slowly and with gentle up/down force) about one second per up and down stroke.
Mixing should take less than one minute. Allow mixture to stand for one minute to
allow surface bubbles to dissipate.
6. Rotate lid to Open position and pour the formula into Dr. Brown's® baby bottles for
feeding or storage.