Publicité
Dr. Brown's
The Dr. Brown's™ Formula Mixing Pitcher is designed to mix formula quickly without
any clumping or adding excess air into the formula. Air is often added to formula during
mixing, usually by shaking. Use of the Formula Mixing Pitcher helps minimize the air for the
best results with your Dr. Brown's® baby bottles.
• Unique mixing blade design helps formula dissolve quickly without clumping.
• Mixing blade remains below the surface to minimize air in the formula.
• Allows preparation of up to four 8 oz/250 mL bottles of formula at a time.
• Dishwasher safe and easy to assemble.
Cleaning
1. Always wash all parts prior to use.
2. Disassemble the Formula Mixing Pitcher.
3. The pitcher vessel is safe for use in the dishwasher (top rack only), electric and
microwave sterilizers, or boiling water. The remaining parts are dishwasher safe (top
rack only).
Assembly
After cleaning, assemble the Formula Mixing Pitcher for use.
1. Attach the mixing blade to the bottom of the spiral post. This snaps on. (Fig.1)
2. Attach the locking ring by placing it on the top end of the spiral post and twisting it
down into position. (Fig. 2)
3. Insert the top end of the spiral post through the inside of the locking lid. (Fig. 3)
4. Insert the top of the post into the slot on the mixing handle. (Fig. 4)
5. Rotate the handle into normal position. (Fig. 5)
6. Affix the locking lid with mixing blade to the pitcher. (Fig. 6)
Formula Mixing Pitcher
™
1
4
2
5
3
6
Publicité
