All manuals and user guides at all-guides.com
Jandy
®
TruGuard
™
& Cartridge
Directions for Use
This product should not be used in any manner inconsistant with the
product manuals and labeling.
Jandy TruGuard Compatibility
Jandy TruGuard systems can be used with all types of pool chemical
treatments available except biguanide products and copper based
algaecides.
Important: When converting a biguanide treated pool to the Jandy
TruGuard system, the pool must be completely drained and refilled.
Then follow the Jandy TruGuard cartridge start-up procedure below.
Startup
• Before starting up a new cartridge, clean debris and algae out of the
pool and pool equipment.
Important: Do not install the new cartridge until the pool water is clean and chemically
balanced.
• Balance pool water before installing Jandy TruGuard.
pH
Calcium hardness
Total alkalinity
Consult with your Jandy Dealer for specific water balance instructions.
| Owner's Manual
7.4 - 7.8
200 - 400 ppm
80 - 150 ppm
ENGLISH
Page 3