Publicité
3.2.4 Measuring Blood Pressure
1. Power on the blood pressure monitor.
2. Press the Start/Stop button to start taking blood pressure
measurements.
4.
The monitor will automatically deflate the cuff slowly
while taking measurements. A typical
takes about 30s.
4. The readings will be displayed when the measurement is
finished.
You can press Start/Stop button again to stop the blood
pressure measurement.
Note: While taking measurements, you should remain
still and not squeeze the cuff
3.2.5 After Taking Measurements
The monitor will automatically release the gas in the cuff
once finished taking measurements.
Press the button to turn the power off after taking
measurements. Remove the cuff.
Note: The device has an automatic power shut-off function,
which turns off the power automatically 2 minutes after
taking measurements.
measurement
.
10
Publicité
