Publicité
INSTRUCTIONS
Charging the power bank
Before first use, charge the power bank. We recommend checking the power bank's charge
before each use. Briefly press the power bank's charge check button, and depending on the
charge, it lights up as follows:
- one LED indicator: power bank charge less than 25%
- two LED indicators: power bank charge 26–50%
- three LED indicators: power bank charge 51–75%
- four LED indicators: power bank charge above 76%
If pressing the button doesn't light up any LED indicator, the power bank is completely drained
of power.
Connect one end of the charging cable to the power bank's USB-C port and the other end
to your laptop's USB port or to a charging adapter (100–240 volts ~, adapter not included).
Based on the power bank's charging status, the corresponding number of LEDs will light up
white, and other LEDs in the row will flash white. As the power bank charges, all the LEDs will
start flashing one by one and then start to glow steadily. Once all LEDs are glowing steadily,
the power bank is fully charged.
Example: The power bank is charged less than 25%. One LED indicator flashes white (the far-
thest from the edge). As soon as the power bank's charge exceeds 25%, the flashing LED starts
to glow, and the next one in the row starts to flash.
Note
If you use the fast charging function, the LED indicator (closest to the edge) will alternately
flash blue and white.
After charging is over, disconnect the power bank.
The charging time depends on the charger used.
If the power bank won't be used for an extended time, charge or drain it to 50% of capacity
and regularly check its charge level.
ENGLISH
7
Publicité
