Publicité
Step 2: Connect the cables
Connect your router to the optical/broadband/cable modem using
a network cable, then connect the router to a power supply.
Optical/broadband/cable modem
(from your broadband provider)
POWER
RESET
LA N
Internet
ADSL
• If the indicator is steady red, this indicates that the router is not
connected to the Internet. Please refer to "Step 3: Set up the router".
• WAN/LAN auto-adaptation port: Connects to the Internet (such as
optical modem, broadband modems, etc.) and wired network device
such as a computer.
Step 3: Set up the router
Method 1: Configure the router on the app
1
Connect your mobile phone to the Wi-Fi
connected to the modem (no password required). Check for
the Wi-Fi name on the bottom of the router.
WiFi
Connected
Insert the cable to the
WAN/LAN auto-adaptation
port on the router
LAN
WiFi
WAN
®
of the router
Wi-Fi Name: XXXXXX
2
Router
Publicité
