Po ttery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham – GreenRo w
29-Sep -2022
PROFESSIONAL INSTALLATION REQUIRED - CONTRACTOR AND PLUMBER needed for
Installation.
•
Please read all instructions carefully before assembling.
•
For your safety, assembly by two or more adults is strongly recommended.
•
Keep instructions for future use.
•
Use only vendor-supplied hardware to assemble. Using unauthorized hardware could jeopardize
the structural integrity of the item.
•
The Vanity Base must be secured to the wall. Wall attachment hardware is not included. For safe
mounting, it is essential to use the proper hardware for your wall type. If walls are drywall or
wood stud, concrete, brick, or plaster, please consult your local hardware store for assistance in
selecting the appropriate hardware.
•
Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware
items needed for proper assembly and installation are not included: ex. shim, spacer,
high-quality silicone or acrylic-based bath sealant, etc.
•
DO NOT USE PLUMBERS PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN
THE MARBLE.
Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to
the wall.
PRE-ASSEMBLY:
•
Remove all parts and hardware from the box and layout on a clear carpeted or scratch-free work
surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal
work surface.
•
Do not dispose of any packaging or contents of the shipping carton until assembly is completed
to avoid accidentally discarding small parts or hardware.
•
Use the parts and hardware lists below to identify and separate each of the pieces included.
•
The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
•
The use of power tools to aid in assembly is not recommended. Power tools can damage
hardware and split wood.
•
Keep all parts out of the reach of children.
•
A standard 8" spread faucet should be used with this Marble top console.
Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware
items needed for proper assembly and installation are not included: ex. shim, spacer,
high-quality silicone or acrylic-based bath sealant, etc.
DO NOT USE PLUMBER PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE
MARBLE.
Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to
the wall.
Williams-So noma Inc.
Assembly Instructions
Instructions d'assemblage
Instrucciones de Ensamblaje
6/20
US-A-SV