Publicité
DELAY FUNCTION
1. First follow steps 1 through 5 above (Using your coffee machine).
2. Press PROGRAM one time, the ON/OFF indicator light will
illuminate to GREEN and will flash until you have set delay time.
3. Set the delayed start time by pressing HOUR and MINUTE
buttons until you reach delayed time desired. The AM/PM
indicator light will appear for PM and disappear for AM.
4. Next, press the DELAY BREW button, the ON/OFF indicator light
will still be GREEN but will stop flashing.
5. After a few seconds, the LED will display the current time.
6. When the delayed brew time begins, the ON/OFF indicator light
will illuminate to RED.
7. You may see the delay brew time by pressing DELAY BREW.
8. Cancel DELAY BREW by pressing ON/OFF.
9. If you want to change the delay brew time, follow steps 2 through
4 above.
10. The brewing process may be interrupted 2 ways;
a. Pressing the ON/OFF button (must press again to continue brew)
b. Pulling out the coffee pot (must return to warming plate within
30 seconds)
11. All other functions (PROGRAM, DELAY BREW, HOUR/MINUTES)
are not available during the brewing process.
12. Remove coffee pot to serve when finished brewing (about 1
minutes after coffee stops dripping).
13. If all coffee will not be served immediately, the coffee can be kept
warm on the warming plate. The coffee maker will automatically
shut off after 2 hours from when the ON/OFF button was
pressed, if it hasn't been manually turned off.
14. Use caution while pouring coffee out of pot, as contents will be
very hot!
15. Always turn off the coffee maker and disconnect the power
supply when not in use
8
www.hadenusa.com
Publicité
