Publicité
EN
PRODUCT COMPONENT
1. Selfie stick holder with tripod.
2. Phone Holder
3. Removable wireless remote control
TECHNICAL SPECIFICATION
Wireless connection
Operating distance: 10m
Phone holder size: 55-85 mm (max.6")
Closed size: 186 mm
Extended size: 700 mm
Weight: 155 g
Removable remote control with interchangeable CR1632
battery
Compatible with iOS and Android
INTENDED USE
To start connection - press and hold the remote control
button. Flashing blue light indicates visibility of the remote
to smartphone. Find ''SELFIE STICK BIGBEN'' words on the
''Bluetooth devices'' through the ''settings'' menu of your
smartphone and connect them. Once the connection
has been established. The blue light will stop flashing and
will turn blue. Once the Bluetooth connection has been
established, pick and activate the required camera (front
or rear). The device is to be placed in the clamp and you
need to make sure that it has been fixed properly. Extend
the telescope arm to the target length. Press the remote
release button to start the selected functionality (photo,
video). To switch it off press and hold the button on the re-
mote control again. A flashing light means that the remote
control has been turned off. Selfie stick can be used in the
traditional manner or as a tripod stand.
REPLACING THE REMOTE-CONTROL
BATTERY
4
Thank you for choosing our product.
1. Remove the cover on the back of the
remote control by unclipping it
Publicité
