Publicité
Installing an M.2 SSD
1.
Align and insert the 2280 M.2 SSD into its slot inside the Mini PC.
2.
Gently push down the 2280 M.2 SSD on top of the standoff, and
fasten it using one of the bundled screws.
3.
Remove the protective film from one side of the bundled thermal
pad, and position it within the two laser-etched marks on the bottom
cover of your Mini PC.
4.
Apply gentle pressure over the thermal pad to ensure adhesion to the
bottom cover.
Laser-etched marks
36
PN Series
Thermal pad
Plastic film
Publicité
