Publicité
All manuals and user guides at all-guides.com
to use the slicing knife
Your knife is suitable for slicing a
variety of foods including cooked
meat, cooked poultry, bread, cakes,
sandwiches, fruit and vegetables.
Frozen Food KN450 only - Your
knife includes freezer blades (larger
teeth) for use with some frozen
foods. They are suitable for cutting
partially thawed or lightly frozen food
but not solid deep frozen food.
1 Make sure the slicing knife is
disconnected from the power supply.
2 Hold the blades by their handles and
interlock together
cutting edge facing downwards
insert the blades into the knife body
and push into place
3 Plug the knife into the power supply.
4 With the food on a suitable cutting
surface, place the blades onto the
food. Operate the cutting blades by
pressing the operating button.
(Releasing the button stops the
cutting blades.) Allow the knife to cut
through the food.
Use the knife by holding it in place,
G
do not use a cutting motion. The
knife will cut automatically as
required either vertically or at an
angle.
When using the slicing knife
the blades should always be
directed away from the
operator.
5 After use, release the operating
button then unplug from the power
supply.
6 Press the eject button and withdraw
the blades from the knife body.
hint
When slicing poultry, cut almost to
G
the bone but go no further, then
separate the meat from the bone
manually.
The high quality hardened blades do
G
not require sharpening.
. With the
.
cleaning
Always switch off and unplug before
G
removing the blades and cleaning.
Never let the power unit, cord or
G
plug get wet.
Handle the blades with care - they
G
are extremely sharp.
power unit
Wipe with a damp cloth, then dry.
G
slicing blades
Separate the blades. Wash by hand,
G
then dry thoroughly.
After use replace the plastic blade
G
cover over the blades.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
using your slicing knife or
G
servicing, spare parts or repairs
G
Contact the shop where you bought
your appliance.
Designed and engineered by
G
Kenwood in the UK.
Made in China.
G
3
Publicité
