Télécharger Imprimer la page

Black & Decker CHV1210 Mode D'emploi page 6

Masquer les pouces Voir aussi pour CHV1210:

Publicité

Figure D - Hang the vac on the wall by placing the opening on the
base of the vac over the hooks in the wall mount bracket as shown in
gure D.
Figure E - Insert the jack plug into the
charging socket.
Charging the battery
From new, the rechargeable cells of the product need a minimum charge time of 24
hours to ensure full power.
We suggest you fully discharge the product when it is used for the first time as this will
help the cells recharge faster.
other position.
Figure F - Plug the jack plug of the charger into
the charging socket of the tool. Plug the charger
into any standard 120 Volt 60 Hz electrical outlet.
The charging indicator will be lit.
While charging, the charger may get warm, this
is perfectly normal and safe. It can remain on
charge indefinitely without damage or danger. It
with the charger provided.
the appliance is connected to the plugged-in
charger.
WARNING:
battery at ambient temperatures below 39°F
Use
Switching on and off
Figure G - To start, slide the On/Off switch
after use so that it will be ready and fully charged
for the next use. Ensure that the product is fully
engaged with the charger plug.
Downloaded from
www.Manualslib.com
Do not charge the
manuals search engine
E
F
G
5
D

Publicité

loading

Ce manuel est également adapté pour:

Chv1410Chv1410bChv1510Chv1610