Publicité
USB CHARGING PORT:
CHARGE UNIT BEFORE USE
• Connect the provided Type C USB plug to the Type C USB charging port on the
side of the unit.
• Connect the provided USB A plug to a power USB A port on a computer or other
USB/AC adapter. (5 Volt/1 Amp (5 Watts) USB A wall adapter) For first time use, charge
unit for about 3 hours, or until is full charge.
• The Indicator Light glows red steadily while the unit is charging and turns OFF once
the unit is fully charged.
***For best battery life and performance, charge the battery at least every three months.
BLUETOOTH PAIRING:
Pairing soother with device
• Press and hold the power button to turn Pock-a-Bye Baby™ ON.
• A blue light indicator will flash quickly indicating it is now in paring mode.
• Turn on your device's Bluetooth mode (check in Options or Settings), locate and
select "INGENUITY" in the Bluetooth menu to complete pairing.
• A tone will sound when pairing is completed.
The blue light indication will flash if the Bluetooth connection is lost
(out of range, about 30 feet).
Pock-a-Bye Baby™ will turn off after 5 minutes without Bluetooth connection.
FULL CHARGED AND LOW BATTERY INDICATION:
When the battery charge is low, the LED indicator will blink red slowly and should
be recharged immediately, while charging, red LED lights up steadily. When fully
charged, the LED indicator will turn off. Charge time is approximately 3 hours.
TROUBLESHOOTING
Unit doesn't respond (no power)
• Make sure unit is completely charged.
• Make sure your device is properly paired with the Pock-a-Bye Baby™.
Unit doesn't respond (locked up/ "frozen")
If the Pock-a-Bye Baby™ does not respond, PRESS and HOLD the power button for
8 seconds to reset the Pock-a-Bye Baby™.
Trouble Pairing a device with Pock-a-Bye Baby™
Bluetooth implementation varies depending on your device's hardware and
operating system.
• When you power ON the speaker, it will automatically link with the last previously
paired Bluetooth device if the device is still within range (approx. 30 feet). To pair
with a different device you must turn off Bluetooth capability on the already paired
device, or take it out of range.
• To do so, first delete INGENUITY from Settings / Bluetooth / My Devices and then
re-pair Ingenuity from the Other Devices list.
ENGLISH
– 18 –
Publicité
