Publicité
EN
Personal safety
1. Be alert. When operating the electric pruning shears, concentrate only on the work. Do not operate when tired, after consuming alcohol or under medication.
While operating, any distractions may lead to serious injury.
2. Use appropriate safety gear. Αlways wear safety goggles, face mask, non-slip safety shoes, helmet and earplugs to reduce chance of damage or injury.
3. Before starting the electric pruning shears, remove all adjustable keys or wrenches. Wrenches or keys left on the rotating parts may cause damage or injury.
4. Do not overstretch your hands when operating. Keep you hands away from the shearing areas. Make sure that any material or surface under the shearing
area will not be damaged by the blades. Stand on firm ground and keep good balance while working to avoid accidents.
5. Dress suitably. Do not wear loose clothing or accessories that can get tangled in moving parts. Keep your hair, clothing and sleeves away from any moving
parts.
Other safety measures
1. When non-shearing objects are placed in the opening, immediately release the trigger. The moving blade will automatically return to the open position.
2. When shearing objects are too tough to cut, release the trigger promptly and the moving blade will automatically return to open position.
3. When batteries will not charge, first check whether the charger is correctly attached to the product. Then check that the charging voltage is in accordance
with the voltage on the type plate.
4. In case of electric or mechanical faults, close the switch off immediately.
5. In cases of not operating under present instructions, the batteries may leak liquid. Keep away from such liquids. If it comes to contact with skin by accident,
rinse with clean water. If it comes to contact with eyes, rinse with clean water and immediately seek medical advice. Liquid discharged from batteries may
cause irritation or burns.
Carefully read all safety warnings and
instructions before use.
MAIN PARTS
PROPER USE AND MAINTENANCE
1. Remove the tool, install the lithium battery, press and hold the power switch for three seconds and then let go. After hearing the sound of two drops, it
means the battery is powered up properly.
2. Quickly press down the trigger twice; the blade opens automatically.
3. Before doing any work, press the trigger to operate the blade blank for several times and listen for any unusual noise or observe if the blade runs unusually
slow or fast. If everything appears to be running properly, start working.
4. To switch off, press the trigger and release it after you hear the sound of two drops. The blade will close automatically.
Notes
• When using the tool continuously for a long time, there is a possibility of overheating. Make sure that you use the tool correctly.
• After completing any seasonal pruning work or when replacing the blade, you should remove the blade and add lubricating oil between the blade for
maintenance.
Battery charging
The battery of the new product is not fully charged. To charge it, insert the battery into the charger and plug the charger into a power outlet. The charger's
indicator light turns red, which shows that the battery is charging. When the charger indicator light turns green, the battery is fully charged and you can then
use it.
3
Do not use or expose the tool in rain.
WWW.NIKOLAOUTOOLS.GR
Do not close the blades by hand to
avoid damage and/or serious injury.
1. Moving blade
2. Shim
3. Dowel
4. Trigger
5. Lithium battery
6. Charger
7. Power switch
Publicité
