Publicité
Mode
0
1
2
P
7.
To add ingredients into the blender jar during operation, turn the speed control to
the "0" position and wait until the motor stops completely. Open the filler cup and
add food through the opening in the lid. To continue processing, put the filler cup
back and set the required speed.
8.
After operation, turn the speed control to the "0" position and unplug the blender.
9. After the motor and the blades have completely stopped, remove the blender jar
from the motor base. Open the lid, and pour out the ingredients from the
blender jar
Note:For blending, do not operate the appliance continuously for more than 90
seconds. Let the main unit base cool down and rest for at least 3 minutes
then resume.
Pulse function
Use Pulse function for brief operation or when there are large-sized ingredients
suspended, or ice crushing.
-
To switch to pulse blending mode during the blending process, turn the speeds
control knob to "P" and wait for 1-3 seconds, then release. Repeat this process
in 3-4 cycles until you got the required blending result.
-
For ice crushing, add 10-12 ice cubes (not more than 2.5cm cube size) to the
blender jar then turn the speeds control knob to "P". Hold for 1-3 seconds and
release. Repeat this blending process until the ice cubes have been crushed
into the ideal size, or becomes fluffy like snowflakes.
Stir Stick
You can use the stir stick to process very thick or frozen mixtures. The stir stick
helps circulation by preventing air from being formed. It is used to stir and push
ingredients into the blades when the blender is on.
Note: Use the stir stick only when the lid is assembled correctly to the jar to avoid
the stir stick hitting the blades.
-
If food is not circulating, remove the filler cup; put the stir stick into the jar
through the lid opening. Hold the top of the stir stick and move it up and down,
turn around or push it toward the side or corner of the jar to help ingredients
down into the blades.
-
If the finished ingredients will not be served at once after blending, you can use
the stir stick to blend it before drinking.
Dry mill use
You can grind coffee beans, nuts, seeds and spices, etc. in the dry mill (see below
table). All large products shall be cut into 1x2cm pieces before grinding.
Products
Nuts (peeled)
Cheese
Coffee beans
Pepper
Sesame
Rice, wheat
Sugar cubes
Dry bread
Soya beans
Tea leaves
Function
Off
Mix liquids and soft foods
Fruit and vegetable processing
For brief operation; Ice crushing
Quantity
20-25g
20-50g
20-50g
5-25g
20-50g
20-50g
4-8 cubes
1 piece
20-50g
20-50g
6
Publicité
