Table Des Matières; Introduction; Owner Responsibility; Product Description - Husqvarna WT 15i Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................4
Operation........................................................................ 5
Maintenance................................................................... 6

Owner responsibility

WARNING: Processing of concrete and
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability to
breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions, use water to
bind the dust, when feasible. If dry operation
is necessary, use an appropriate dust
extractor.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
2
Contents
Troubleshooting.............................................................. 7
Transportation, storage and disposal............................. 7
Technical data................................................................ 8
Accessories.................................................................... 8

Introduction

read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.

Product description

The product is a water tank that is used together with
Husqvarna power tools. For more information, refer to
the Operator's manual for the power tool.
There are 2 models of the product. 1 model that has
embedded connectivity, refer to
on page 2 , and 1 model is without embedded
connectivity.
Embedded connectivity
Husqvarna Fleet Services
management solution that gives the fleet manager an
overview of all products that are connected via either
embedded or aftermarket sensors. The sensors record
data like runtime, service intervals, and more. For more
information about Husqvarna Fleet Services
download the iOS or Android app Husqvarna Fleet
Services at https://apps.apple.com/se/app/husqvarna-
fleet-services/id1334672726 or https://play.google.com/
store/apps/details?id=com.husqvarna.hfsmobile&hl=en.
Products with embedded connectivity are connected via
the embedded Husqvarna Fleet Services
have BLE technology radio spectrum. For more
information regarding how to use it, refer to
embedded connectivity on page 6 . For information of
the Bluetooth Low Energy (BLE), refer to
connectivity on page 8 .
Embedded connectivity
™
is a cloud asset
™
,
™
sensor that
To use
Embedded
1572 - 001 - 21.12.2020