Publicité
2pcs - P7 Manual Scorer
1pc - P8
Bowling Pin Side Block-A
1pc - P9
Bowling Pin Back Block
STEP 5
Attach the P7 Manual Scorers into the pilot holes on the top rail using the H5 Flat Head Screws
as shown in FIGURE 5.
Attach the P8 Bowling Pin
Side Block-A and the P10
Bowling Pin Side Block-B
onto the P9 Bowling Pin Back
Block using the H6 Phillips
Flat Head Screws as shown
in DETAIL A.
Tighten, but DO NOT
strip out screws.
A4
AC/DC
Adapter
Plug A4 AC/DC Adapter here.
Do not allow Adapter cord to become
a trip hazard.
Unplug A/C Adapter after each use.
All Rights Reserved.
© 202 0 Escalad e Sports
PARTS REQUIRED
H5
P7
C3 ON/OFF
Switch
H6
THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
CABINET
HOLD TABLE
1pc - P10
4pcs - H5 Phillips Flat Head Screw
6pcs - H6 Phillips Flat Head Screw
A7
FIGURE 5
DETAIL A
P8
P10
P9
H6
DO NOT LEAN THE
DO NOT
TABLE ON ITS LEGS!
HOLD THE
LEGS
Fo r Custome r Servic e Cal l 1-888-996-2729
8
Bowling Pin Side Block-B
H5
P7
A6
Note: Bowling Pin
Block is designed to
help keep the pins on
the table during play.
H6
H6
Pilot Holes
Publicité
