Publicité
The default entry page is the browse mode. Pressing
the correct password to enter the modification mode;
could be used to move the cursor,
modify the parameter values when the cursor is located at the current place;
and
buttons could be finally used to respectively confirm and cancel
the modification of the control parameters.
5.2 Main menu
Enter the Main Menu by pressing "Esc".
respectively used to move the cursor to select the menu items, "OK" and
"ESC" buttons are respectively used to enter or exit the corresponding
pages of the menu items.
1. Monitoring
2. Device Info.
3. Test Operation
4. Control Para.
and
"Up" and "Down" buttons are
5. Load Set
6. Device Para
7. Device PSW.
8. Factory Reset
13
button and inputting
and
buttons could be used to
9. Failure Info.
10. Meter Para.
buttons
Publicité
