Télécharger Imprimer la page

VEVOR GEOMETRIC CLIMBER PLAY Manuel D'instructions page 4

Publicité

and identifiers in this document. Test fit all Bolts by inserting them into their
respective holes. Do not scrape away all of the powder coating. Bare metal may
rust. You may need to pound some Bolts into place with a hammer or mallet.
*Two adults required to complete assembly*
Only adults should set up the product. Do not allow children in the setup
area until assembly is complete.
INSTALLATION & GROUND PREPARATION INSTRUCTIONS:
· Provide enough room so that children can use the equipment safely. For example,
for structures with multiple play activities, a slide should not exit in front of a swing.
·Separate active and quiet activities from each other. For example, locate
sandboxes away from swings or use a guardrail or barrier to separate the sandbox
from the movement of the swings.
· Do not install home playground equipment over concrete, asphalt, packed earth,
grass, carpet, or any other hard surface. A fall onto a hard surface can result in
serious injury to the equipment user.
· To prevent serious injury, warn children that they must not use the equipment
until properly installed.
· Create a site free of obstacles that could cause injuries – such as low
overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks,
bricks, and concrete.
· Choose a level location for the equipment. This can reduce the likelihood of the
play set tipping over and loose-fill surfacing materials washing away during heavy
rains.
PLAYGROUND AND SURFACE MATERIALS INSTRUCTIONS
· Use containment, such as digging out around the perimeter and/or lining the
perimeter with landscape edging.
· Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
· Installation of rubber tiles or poured-in-place surfaces (other than loose fill
materials) generally requires a professional and are not "do-it-yourself" projects.
· Use playground surfacing materials (other than loose fill material) that comply to
the safety standard ASTM F1292 Standard Specification for Impact Attenuation of
Surfacing Materials within the Use Zone of Playground Equipment.
3

Publicité

loading

Ce manuel est également adapté pour:

Jx-dc-06sl