Pioneer CT-680 Mode D'emploi

Operating Instructions
Bedienungsanleitung
Mode d'emploi
Istruzioni per l'uso
STEREO CASSETTE TAPE DECK.
STEREO-KASSETTENBANDGERAT
PLATINE CASSETTE STEREO
REGISTRATORE A CASSETTE STEREO
CT-680
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the ex-
planatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING: ro prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
switch. U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
Before your model is shipped from the factory, the switch is set to the
power requirements of the destination; nevertheless, you should
check that it is set properly before plugging the power cord into the
AC outlet.
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage selector and
adjust to the voltage value of your area.
Medium-size screwdriver
"This product is manufactured to comply with the radio in-
terference requirements of EEC Directive 76/889/EEC and
82/499/EEC."
(D PIONEER:
The future of sound and vision.
2
<
©
">
<
e
LE
ITALIA