Publicité
2. 2. 2. 2.
Technical data
Technical data
Technical data
Technical data
Chassis
Measurements
Engine
Delay
Driving speed
Driving speed
Tyre drive
Castor tyres
Battery
Charger
Weight
Max. slope up
Max. slope down
Max. drag weight
3. 3. 3. 3.
User conditions
User conditions
User conditions
User conditions
(Slanting pressed words reflects to the chapter list of understandings)
3.1
Operator should always...
..completely read this manual and understand everything written in this manual before
he/she starts to work with the machine. In case of any doubt he/she has to contact the
supervisor and/or manufacturer or supplier.
..be 16 years or older.
..be absolutely capable to use this machine.
..have a good enough overview at any time of the path he/she will follow.
..be able to stop the machine at any time on a safe distance and a controllable manner.
..make sure that the by him/her to follow road is without obstacles or persons.
..prevent that person(s) or other obstacle(s) are in the path that they will follow.
..choose the speed of the machine in such way that in the unlikely event, his/her route is
going to be blocked he/she always can control the combination to press the emergency stop
and hold the machine in its place.
..position his/her-self in a way that he/she has a good view over the path to follow.
..choose a position that he/she can not be trapped or run over by the machine.
..never change the by the supplier or technical services adjustifications, placed securities or
the implementations.
..take a position as described in chapter 3 and 7.2.
: Steel weld/bend
: Operational: height 1060-1260 mms (flexible pole)
Length 800 mms
Breadth 600 mms.
: 24 V DC, standard 300 W. 4
: Variable and programmable
: Variable and user-defined as from 0 till 5,5 km/u.
: Speed and acceleration are programmable
: standard Ø 260 x 85 rubber tyre black + rim
: standard Ø 160 x 35 massive rubber.
: Power pack met 24V traction 18A/h battery.
: 24 V-2 Amp
: Machine
: 85 Kg.
: Power pack : 14,5 Kg.
: 15° degree
: 15° degree
: horizontal till 400 Kg. / op max. slope: 400 Kg.
graphite brush
19
Publicité
