Publicité
h. There are 2 methods for installing the chimney cover. Please check
the attachedpic for reference.
1. After drilling the 2 holes and fixing the bracket, hang the chimney
cover by matching the both side lock (Pic.1).
2. After drilling the 2 holes and fixing the bracket, install the chimney
cover by locking with 2 screws in both side holes (Pic.2).
i. Finally fix the outer shaft part to the hood body with 2 screws
(ST3x10mm).
(2*ST3 x 10 mm）
j.
Caution: before use, please remove the white/blue protective film
on the cooker hood, chimney covers and baffle filters.
10
(pic.1)
(pic.2)
h
i
j
Publicité
