POLTI CIMEX ERADICATOR Manuel D'instructions page 19

TROUBLESHOOTING
PROBLEM
The appliance does not
switch on.
"Out of water" indicator
light (J) is on.
No Polti
consumption during use.
If problems persist or are not listed above, please contact our Polti Customer Services.
USA: 1-888-99-POLTI (1-888-997-6584)
Monday - Friday: 8am - 6pm EST
POLTI CIMEX ERADICATOR
Check that the appliance is correctly plugged into a suitable
current socket.
Ensure that the appliance has been turned on using the
ON/OFF switch (B).
There is no water in the boiler.
Fill according to the instructions given in this manual.
HPMed Check that the wick has been inserted correctly into the hole of
Polti Steam Disinfector.
SOLUTION
19