Publicité
•
If the power cable needs to be replaced, use a cable of the same model, and have the replacement
done by a qualified professional.
•
Installation and maintenance of this product's electrical connections must be performed by a
certified electrician.
Operation
1.
Connect the power supply. Do not operate the thermal tube without liquid to avoid dry burning.
2.
Position the thermostats at the front of the device to allow separate control of the heating plate power as
needed by the user.
3.
Once the power supply is connected and switched on, the green indicator light will illuminate. Rotate the
temperature controller clockwise to the desired setting: the first setting provides maximum power, the
second setting moderate power, and the third setting the lowest power. When the yellow heating
indicator lights up, current flows to the stove, and the heating plate begins warming. As the target
temperature is reached, the heating plates will stop, the yellow indicator will turn off, and power will be
disconnected. If the temperature drops slightly, the thermostat will automatically reconnect power,
relighting the yellow indicator, and the heating plates will resume operation to maintain the set
temperature range.
4.
Adjust the temperature according to the specific requirements of different foods and secure the setting to
optimize energy use and ensure ideal cooking results.
5.
After use, set the thermostat to "0°C" and turn off the main power switch.
6.
If any irregularities occur during operation, discontinue use immediately until issues are checked and
resolved.
Cleaning and maintenance
1.
Before cleaning or maintenance, ensure the power supply is disconnected to prevent accidents.
2.
After daily use, wipe the surface and power cord with a damp towel that contains no corrosive cleaners.
Do not use water directly, as this could damage the electrical components.
Electrical diagram
A
220V
~
HL1
B
E
WK1
K1
HL2
HL5
EH1
EH12
EH21
EN
WK2
WK3
K2
K3
HL3
HL6
EH22
EH31
EH32
WK4
K4
HL4
HL8
HL7
EH41
EH42
Publicité
