Publicité
to crack and allow it to fall from its ceiling mount causing damage to
the device and/or serious injury.
Do not stand the projector vertically. Doing so may cause the projector
to fall over, causing damage and/or injury.
While the projector is operating, you may notice hot air and a strong
odor emanating from its ventilation grill. This is normal and not a
malfunction.
CLEANING THE PROJECTOR
Turn off the projector and unplug the power plug from the AC
outlet before cleaning the unit.
Use a soft, dry cloth with mild detergent to clean the product
housing. Do not use harsh cleaners, waxes, or solvents to clean the
unit.
CLEANING THE LENS
15-20 minutes before cleaning the lens, turn off the projector and
unplug the power cord to allow the lens to cool down completely.
Failure to do so may cause damage to the lens that is not covered by
warranty.
Use compressed air to remove dust from the surfaces of the projector.
Use a microfiber cloth for cleaning and make sure to wipe the lens
gently. Do not touch the lens with your fingers.
Do not use detergents or solvents such as alcohol to clean the lens,
only use water as a cleaning agent. Damaging the lens during
cleaning is not covered under warranty.
Do not wipe or tap the lens with a hard object.
PHOTOSENSITIVE SEIZURE WARNING
Some viewers may experience a medical issue such as epileptic
seizure or stroke when exposed to flashing images and/or lights
displayed by this device. If you suffer from or have a family history of
epilepsy or stroke, please consult with a medical specialist before
using the projector.
EN 04
Publicité
