König Electronic CMP-PCISER10 Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
4. Click the "Exit" button to complete the driver installation.
5. Shutdown the PC.
6. Place the PCI card into a PCI slot and then power on the system.
7. Once the system is fully booted Windows
®
For Windows
Vista-x64
1. Do not insert the PCI card into PCI slot.
2. Type D:\PCI_IO\MCS9865\Vista64\PCISetup.exe, then click OK.
3. Press the "Install" button to install the drivers.
4. Click the "Exit" button to complete the driver installation.
5. Shutdown the PC.
6. Place the PCI card into a PCI slot and then power on the system.
7. Once the system is fully booted Windows® will automatically start installing the device's driver software.
®
To Verify Windows
Click on the Device Manager tab in System Properties, which you access from the Windows
should see two High-Speed PCI Serial Port ... installed under Ports (COM & LPT) item.
Safety precautions:
Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be mixed
with general household waste. There is a separate collections system for these products.
Ausstattungsmerkmale
Ausstattung:
• Entspricht PCI Local Bus Spezifikation, Revision 2.3
• Unterstützt 2 x UART serielle Schnittstellen
• Plug and Play
• Automatische Auswahl von IRQ und E/A-Adresse
• Integrierter 16C450/550 kompatibler UART
• Auf dem Chip 256-Byte FIFOs in Sende- und Empfangspfad jeder seriellen Schnittstelle
• Serielle Datenübertragungsrate bis zu 115200 bps
Bus
• PCI 32-bit
Anschlüsse
• 2 x DB9 serielle Stecker
Systemanforderungen
®
Windows
2000, XP/2003 32/64 Bit, Vista 32/64 Bit
Verfügbarer PCI-Slot
®
will automatically start installing the device's driver software.
Driver Installation
DEUTSCH
3
®
Control Panel. You

Publicité

Table des Matières
loading

Table des Matières