System Requirements; Manual; Hardware Installation; Driver Installation - König Electronic CMP-PCISER10 Mode D'emploi

Features and Benefits
Features: • Compliant with PCI Local Bus Specification, Revision 2.3
• Supports 2x UART serial ports
• Easy Plug and Play
• Automatically selects IRQ & I/O address
• Built-in 16C450/550 compatible UART
• On chip 256 byte FIFOs in transmit and receive path of each serial port
• Serial data transfer rate up to 115200bps
Bus • PCI 32-bit
Connectors • 2x DB9 male serial connectors

System Requirements

®
• Windows 2000, XP/2003 32/64 bit, Vista 32/64 bit
• Available PCI slot
Package Contents
• 1x 2-Port Serial PCI Card
• 1x Driver CD
• 1x User manual

Hardware Installation

1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card's bus connector with the selected PCI slot on the motherboard. Push the
board down firmly.
5. Replace the slot bracket's holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.

Driver Installation

®
For Windows 2000/XP/Server 2003
1. Do not insert the PCI card into a PCI slot.
®
2. On the Windows desktop click Start, then Run.
3. Type D:\PCI_IO\MCS9865\XP\PciSetup.exe, then click OK.
4. Press the "Install" button to install the drivers.
5. Click the "Exit" button to complete the driver installation.
6. Shutdown the PC.
7. Place the PCI card into a PCI slot and then power on the system.
8. Once the system is fully booted Windows® will automatically start installing the device's driver software.
®
For Windows XP-x64/Server 2003-x64
1. Do not insert the PCI card into a PCI slot.
2. Type D:\PCI_IO\MCS9865\XP64\PCISetup.exe, then click OK.
3. Press the "Install" button to install the drivers.
4. Click the "Exit" button to complete the driver installation.
5. Shutdown the PC.
6. Place the PCI card into a PCI slot then power on the system.
7. Once the system is fully booted Windows
®
For Windows Vista
1. Do not insert the PCI card into a PCI slot.
2. Type D:\PCI_IO\MCS9865\Vista32\PciSetup.exe, then click OK.
3. Press the "Install" button to install the drivers.
ENGLISH
®
will automatically start installing the device's driver software.
2