Publicité
COMBO60Evo - 100V 60W Mixer/Amplifier - USB-Tuner-BT-DAB+
5 - Usage
Use high-quality cables to connect your speakers.
To avoid short-circuits, check that the cable strands are correctly twisted before connecting them to the output
terminals.
When connecting your loudspeakers to the amplifier, be sure to observe the correct polarity.
Connect transformer-equipped loudspeakers to the 70/100V and COM output terminals.
Warning: it is not possible to use the 4 Ohms output and the 70/100V output simultaneously. Such wiring will
damage the amplifier.
Microphones
Hazardous voltage
Loudspeaker lines should be connected to the amplifier last.
Switch on the amplifier once the installation has been completed and checked.
Audio source
+
24V battery
Caution: The sum of the power ratings of all
connected loudspeakers must not exceed the
maximum power rating of the amplifier.
-
24 V
Alarm
Low impedance
switch
Antenna
70 or 100 V speakers
Or
speaker
English
Page 13
Publicité
