Publicité
BUTTONS ON THE PROJECTOR
The buttons on the top of the projector function the same way as they do on the remote. See
the Product Diagram section at the beginning of this guide
INSTALLING YOUR PROJECTOR
The projector can be placed on a table or other similar, stable surface. It can also be mounted to
the ceiling. Professional installation is recommended for a ceiling mount installation.
Warning: To avoid danger, please do not install the projector near water or extreme heat
Do not block the ventilation on the back of the projector. 10 cm (4 inches) of free space
must be available around the entire unit.
DETERMINING DISTANCE AND LOCATION FOR THE PROJECTOR
You may wish to measure the distance from the lens to the surface that the image will be projected
on. This will give an idea of how big the projected image will be.
Center of the lens
IMPORTANT:
For any type of installation other than front table projection, you will need to rotate
the image. This can be done with the Flip button, or by noting the Rotate setting below and chan-
ging it in the Options section of the Settings menu (covered later in the guide).
Screen or
Projection Surface
7 2
"
6 0
"
5 0
"
4 5
"
3 7
"
9
Publicité
