CONTROLS
Play/pause
Volume up
Volume down
Next track
Previous track
Answer/hang up
incoming calls
Reject calls
Call back
Turn on voice
assistant
AUX-IN
• Plugging in a 3,5mm cable will automatically switch to
AUX-IN mode, and Bluetooth mode will turn off.
• When using AUX-IN mode, audio and volume control
need to be done on the device.
OTHER FUNCTIONS
• If the headset is left idle and link is lost, the blue and red
LEDs will flash alternately
• If the headset is running on low battery, then the red
LED will flash 2 times every 30 seconds until it is plugged
into a charging source.
Press the multifunction button
Press the volume up button
Press the volume down button
Long press the volume up button
Long press the volume down button
Short press the multifunction button
Long press the multifunction button for 2s
Double press quickly on the multifunction
Press the dedicated voice assistant button
button
A
7