Publicité
GB
3.4.1
General assembly requirements
The following general requirements must be ensured for safe and reliable operation of the air/water heat
exchangers:
• Installed components in the switch cabinet must not impede air circulation.
• Secure the switch cabinet against tipping.
• Ensure that provided hinges can support the additional weight with the air/water heat exchangers.
• Assembly of the air/water heat exchanger can take place with and without an external unit cover.
Following assembly (without unit cover), attach the line/ protective grounding, connection line/display unit and
assemble everything together on the unit.
• Protect the installation location from heavy contamination with covers.
Operating manual PWS and PWI 6302C 086100047c © Pfannenberg GmbH
Page 12 / 32
Publicité
