Publicité
THE BABY COT SET INCLUDES: Folding cot; Second layer; Changing pad; Toy bar with 3 toys;
Carrying bag.
ASSEMBLY AND OPERATION: ATTENTION! Follow exactly the instructions and sequence for
assembling the product as described in the text and illustrations. Never put fingers inside the
corners or any other moving parts of the cot while folding and unfolding the cot.
1. UNFOLDING THE COT - Remove the cot from the bag. Loosen the self-adhesive tapes that
hold the mattress. Remove the cot and set the mattress aside. Place the cot upright and separate
the legs by pulling both sides of the cot in opposite directions. Unfold all four corners of the crib
so that you can catch the locking mechanisms in the middle of each side. Lift the sides of the
crib until they lock. Push the centre of the crib down until it is fully unfolded and locked (you will
hear a clicking sound). Place the mattress in the cot with the soft side up. Attach the mattress
to the base.
2. FOLDING THE COT - Remove the mattress. Pull the strap of the locking mechanism on the
bottom of the cot as MAXIMUM as possible to release the lock. ATTENTION! Failure to pull the
mechanism to its highest position may damage the locking of the sides. Warranty conditions do
not include damage caused by improper use of the product. Find the buttons in the middle of
each side. Press them and fold all sides of the crib. Take the mattress and wrap it around it. Close
the package by wrapping the velcro straps around the mattress. Put the cot in the carrying case
and fasten the zipper.
3. INSTALLING THE SECOND FLOOR LEVEL - Install the second level with its zipper and the one
on the sides of the cot. Place the tops of the 4 metal tubes in the pockets at the top of the second
level and connect the tubes. Place the mattress on the second level and secure it with the straps
under it.
4. INSTALLATION AND USE OF THE CHANGING PAD - Place the metal side tubes in the pockets
on the sides of the pad and connect them. Fix the pad to the long sides with the clamps and to
the short side with the tic-tac buttons.
5. INSTALLATION AND USE OF THE CRIB TOY - – Attach the three toys to the arch (place them
in the places indicated by the self-adhesive tapes). Secure the arch on both sides of the cot
with the clamps.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean the plastic or metal parts of the product with a soft cotton cloth or sponge moistened with
water. For cleaning the changing pad follow the instructions on the label. Do not use bleach,
aggressive detergents, or abrasive products to clean the product. All textile parts and fabrics
should be washed only by hand, following the instructions on the label (to be cleaned with a
damp cloth and a mild detergent). After cleaning, allow the cot to dry well before using it. Do
not fold or remove the cot before it is completely dry. Do not expose the product to direct
sunlight for extended periods of time and to extreme temperatures that may change colour and
damage exposed parts. Do not place objects in or on the product to avoid damaging the
structure and / or upholstery. Store the product in a clean and dry place.
Manufactured for Moni in PRC,
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.moni.bg
20
Publicité
