Publicité
Setting the Clock
1. Long-press the MODE button; the setting will start flashing.
2. Use the UP button to set values: minute – hour – 12/24 h time
format – year – month – day.
3. Short-pressing MODE navigates between the values.
4. Holding the UP button adjusts values faster.
Date Display
Pressing the UP button displays the date for a short time.
Time Notification
Notification at the top of the hour (1× beep).
To activate, see Setting an Alarm.
Setting an Alarm
1. Press the MODE button to switch to alarm settings mode.
2. Hold the MODE button for 2 seconds. The minute value will
start flashing.
3. Use the UP button to set the minutes, confirm by pressing MODE.
4. Use the UP button to set the hour, confirm by pressing MODE.
When you are finished with setting, press the UP button repeatedly;
the screen will display:
alarm active
time notification active
alarm and time notification both active
When the alarm rings, press any button to silence it. It will ring
again the next day.
If you do not press any button while the alarm is ringing, the ringing
will stop automatically after 1 minute.
The alarm will ring again the next day.
Indoor Temperature and Humidity, Unit of Temperature
Indoor temperature is displayed in field 5.
Indoor humidity is displayed in field 6.
Repeatedly pressing the °C/°F button switches between °C and
°F unit.
6
Publicité
