Publicité
3.2 First use
The first time, use the key to open the product.
1.
Remove the emergency lock cover.
2. Insert the key into the lock and turn it counterclockwise.
3. Turn the knob clockwise to open the door.
3.3 Inserting the batteries
1.
Open the door of the product.
2. Insert the batteries into the battery compartment.
3. If the red and green lights come on at the same time, the batteries are dead and must
be replaced. The door will automatically fall into the lock when you close it. Do not close
the door before replacing the batteries.
NOTE
◊
If there are no batteries in the product for more than 30 minutes, or the batteries do not
work for more than 30 minutes, you must reset the code.
3.4 Using the spare battery compartment
If the batteries on the inside of the door are empty, you can use the battery compartment
and jack cable provided to open the product.
1.
Supply the battery compartment with batteries.
2. Insert one jack cable plug into the battery compartment and the other plug into the
bottom of the control panel on the front of the product.
3. Power is now supplied to the control panel.
4. You can now open the product by entering your code.
NOTE
◊
Replace the batteries inside once the product is open.
3.5 Setting the code
1.
Open the door of the product.
2. Press the reset button once. When the yellow light comes on, you can set the code.
3. Choose your code (3 to 8 numbers) and press "#" or "*". If the buzzer sounds twice, the
code is set.
4. If the buzzer sounds three times and the yellow light flashes, the code is not set. Set the
code again.
English
21
Publicité
