Publicité
3. Instructions for use
3.1 Mount
ATTENTION!
◊
Measure in advance to see if your monitor will fit the VESA plate before you begin
mounting.
Step 1A - Mounting with the C-clamp
1
F
L
1.
Use 3 bolts M5x14 (F) to attach the bracket of the C-clamp (C) to the pole (A). Tighten the
bolts with the Allen wrench (L), as shown in Figure 1.
2. Use 2 bolts M8x12 (G) to attach the C-clamp (B) to the bracket of the C-clamp (C).
Tighten the bolts with the Allen wrench (L). Turn the knob to secure the C-clamp to the
desk, as shown in Figure 2.
Step 1B - Mounting with the transit clamp
NOTE
◊
Make sure there is a cable grommet opening in the table. If the cable grommet opening
has a plastic protective plate, remove it.
◊
Make sure the surface on the table is level before mounting the product.
22
2
A
C
G
B
L
Publicité
