Publicité
9
11
Pairing the Zigbee Gateway with the App
(If you're already using the gateway, skip this step)
Plug a power cable into the gateway and enable GPS and Bluetooth connection on your mobile device.
Tap Add Device in the app.
Tap the GoSmart list on the left and tap the Smart Multi Gateway IP-1000Z icon.
Follow the instructions in the app and enter the name and password for your 2.4 GHz Wi-Fi network.
The gateway will pair with the app within 2 minutes.
Note: If the gateway fails to pair, repeat the process and check the settings using the manual for the gateway.
5 GHz Wi-Fi networks are not supported.
10
5 s
12
13
GB | 7
Publicité
