Publicité
•
The product may be used by people with physical or mental disabilities, provided they are
properly instructed and informed about the safe use of the product and understand its
potential hazards.
•
To avoid personal injury and damage to the product, do not allow anyone to climb, sit, stand
or climb on the product.
•
Do not allow children to play with the product. Use and store the product out of the reach of
children.
2.3 Use
•
Place the product on a flat, level and stable surface.
•
Move the product only when it is empty.
•
Do not place the product in direct sunlight.
•
Keep the product away from extreme heat.
•
Before assembly, check that all parts are present.
•
Be careful while handling the tube edges to avoid personal injury.
•
Make sure the tubes are as deep as possible in the connectors so that the product stands
firmly and stably.
•
Do not place heavy items on the top racks to avoid damage to the product and personal
injury.
3. Instructions for use
3.1 Assembly
CAUTION!
◊
Press all parts together deeply and firmly to ensure the stability of the product.
◊
Make sure the structure is stable before using the product.
1.
Attach the rods HS96 and HS24 together using connector B16, as shown in image 1.
2. Slide the base plate onto the rods. Make sure the waterproof side is facing up, as shown in
image 2.
3. Attach HS24 to the rods using B16, as shown in image 3.
4. Attach all layers one by one, as shown in image 4.
5. Attach rods H17 to the bottom layer, as shown in image 5.
6. Attach all layers to each other as shown in image 6.
7.
Fasten the rods H17 and HS24 together through K16. Then attach the assembly to the top
layer, as shown in image 7.
English
17
Publicité
