Publicité
Insofar as possible, keep the container of the product to be transferred fixed and inserted into it,
the product return tubing (probe).
The unit has been designed for a long service life and can be used with most of the usual products on
the market. Its use with highly aggressive products will quickly increase the need for maintenance
and spare parts. If you need to apply special products, please contact ELCOMETER Ltd.
If the equipment is going to remain for a long time running empty, disconnect it from the general
air network.
ELCOMETER recommends the installation of some sort of SAGOLA air
treatment equipment in the general compressed air network, in order
to optimise the operation of the equipment.
07. Description of the equipment
The Elcometer HUDSON 60SS is a fluid supply piston pump with ratio of 1:1. For transferring low
viscosity fluids.
Designed for coupling directly to 50 and 200 L barrels. Low air consumption, does not require
any kind of specific installation. Eliminates risk of explosion when transferring inflammable
products.
The Elcometer HUDSON 60SS equipment can be used to apply conveniently diluted products
used widely in the Construction, Automotive, Timber, Plastics Industry, etc.
Can transfer a wide variety of products:
- Lacquers.
- Paints.
- Solvents.
- Dyes.
- Lubricants.
- Glues and adhesives.
- Water-based products.
- Acids.
- All kinds of low and medium viscosity products and corrosive products.
The unit can be supplied in the following versions:
- Elcometer HUDSON 60SS Long
- Elcometer HUDSON 60SS Short
EN
06
short
long
www.elcometer.com
Publicité
