Assembly Instructions for Model Number 139E-BL
uphoria
IMPORTANT INFORMATION
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled.
In case of return or exchange, failure to return product in similar condition as received could result in limited
reimbursement. Please save sales receipt as proof of purchase for warranty purposes. Check to ensure you
have all the parts below. If you discover any parts are missing, immediately call our toll-free service helpline at
1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. EST) or at info@midwesthomes4pets.com.
PARTS IDENTIFICATION
A - Base
F - Long Post
G - Short Post
** NOTES**
1. Posts come with black cap attached to screws,
remove black cap before assembly.
2. Bowl (B) uses a pillow; this is not attached and can be
placed in bowl after Step 1.
ASSEMBLY INSTRUCTIONS
Attach Long Post (F) and Short Post (G) to Base
1.
(A). Long Post has one screw pre-attached, insert
this into Base and rotate until secure. Short Post
has two screws pre-attached, insert one into Base
and rotate until secure. Attach Bowl (B) to Short
Post by placing on top of screw and rotating until
secure.
2.
Attach Scratcher (D) to Platform (C) using the two
Bolts (I). Screw bolts through bottom of L bracket
and attach to bottom of Platform. Use Allen Wrench
to secure bolts.
TM
B - Bowl
C - Platform
H - Medium Post
800-428-8560
TM
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
D - Scratcher
I - Bolt
(2) - 0.8in (20mm)
Allen Wrench Included
for Assembly.
L Bracket
y
E - Bolstered Bed
J - Dual Thread Screw
(1) - 3.15in (80mm)
2