Publicité
Leg rest installation instructions
Connect the leg massage section air tube with the air tube on the massage chair. Connect the
wire harness of the leg rest to the one from the chair and insert both the air tube and wiring harness
into the seat frame (figure 1). Place the round tube from the left and right sides of the leg rest to the
chair support brackets (figure 2).
Hang the lower leg sleeved with the fixing block on the hook of the massage chair seat frame (Fig. 3).
Fasten the lower leg on the massage chair with 2 M4 screws (one on the left and one on the right).
Check whether there is any abnormality in the up-and-down turning mechanism and make sure the
screws are correctly tightened (Fig. 4)
Publicité
