Replacing The Filter - Munchkin MKCA0799 Manuel D'utilisation

How to Use
AIR QUALITY SENSOR
Each time the air purifier is turned on, or if fan speed level is changed, the LED indicator
will inform you of the air quality level by pulsing twice with the following color.
AIR QUALITY LEVEL
Good
Moderate
Poor
NOTE: The gas sensor has a 3-minute warm up period during which the gas sensor will
blink white, indicating that it is not yet reading the air quality level.
DARK MODE
If desired, the LED indicator can be turned off while the air purifier continues to operate.
Press the power button for 3 seconds. The air purifier will continue to operate without the
light function.
10
LED INDICATOR COLOR
Green
Yellow
Red

REPLACING THE FILTER

Each filter can be used for up to 3 months of operation. When the filter needs to be re-
placed, the blue LED indicator will blink on and off continuously.
1. Hold the main unit firmly, then turn the
base clockwise.
2. Slide the base-and-filter assembly out
from the main unit.
3. Turn the old filter counterclockwise to
remove from the base.
How to Use
11