Publicité
Display
1. Refrigerating icon
4. PowerCool icon
Key
A. Temperature up button
C. Temperature zone selection
1) When power on the refridgerator for the 1st time, the whole dispaly panel will shine for 3
seconds. Then the dispaly panel enters the normal display. The first time for using the
refridgerator, the default set temperatures is -20°C.
2) When the error occurs, the display panel shows the error code. Otherwise, the display
panel shows the set temperature.
3) Generally, the setting data will take effect after 30s without door opening action or key
operation, and the display panel will go out after 30s. When the display panel is not lit, the
display panel will normally light up if there is a key operation.
The display panel will light up in case of error with "visible error code", then the display panel
will go out after 30s.
①
③
④
A
B
C
2. Freezer icon
5. PowerFreeze icon
13
②
⑤
3. Temperature display icon
B. Temperature down button
V.1
Publicité
