Publicité
Face Recognition Camera/ English
Face Recognition Camera/ English
9. Install Instruction
Box 86 for Wall-Mounted Installation
1. Install stickers on the wall, and make holes in the wall according to the height and
position of the stickers to install Box 86.
2. Align the outlet of the hanging board with the center of the Box 86, punch four
mounting holes on the wall according to the punching size diagram, and insert four
wall plugs.
3. Use four KA 4*25 screwsto f ix the hanging board to the wall. Connect the cable of
the external device to the cable, arrange the cables, and determine the cable outlet
method.
4. Hook the device from top to bottom on the mounting plate, and make sure that the
upper part of the hanging plate is inserted into the groove on the back of the device.
5. Fix the device and the hanging plate from the bottom with a screw.
Wall punching size chart
8
9
Publicité
