Backlight - Teknofun 811169 Notice D'utilisation

Before using, open the battery compartment, taking care to remove the screw, put 4 AA Alkaline batteries
LR06 (not included) while respecting the polarity + / - shown in the box. After installing the batteries, close
the door by screwing the screw. You can also use an AC adapter type Input: 100-240V 50/60Hz 0.2A Max
Output: 5V 0.5A-not supplied.
Use the cable supplied with a USB connection (on AC adapter of the above model or directly on a computer
with a USB connection).
START LIGHT FUNCTION
Press button "LED Light" to change color one by one or automatically: slow or fast.
START AUDIO
Connect the cable with a 3.5mm jack on each side, your MP3/MP4/Ipod and your base at the rear.
Turn the button on, the sound will come out of your device, adjust the volume on your auxiliary
device (MP3/MP4/Ipod). When you unplug your auxiliary device remember to push the button to
OFF.

BACKLIGHT

Press backlight push button and a blue LED light will illuminate the LCD for 3 sec.
DISPLAY TIME OR ALARM
Press the button "Time / Alarm" to choose display of the time or display of the alarm.
Alarm display will remain for 100sec before returning automatically to time display.
SET TIME AND DATE
In order to set time and date, make sure that the LCD is showing the time (press "Time / Alarm"
push button to select).
811169 & 811211 USER MANUAL
LAMP AND AUDIO SETTING UP INSTRUCTIONS
ALARM CLOCK SETTING UP INSTRUCTIONS
4