Publicité
Preparation
Lift the speakers from the cartons by
holding the cabinets. Do not touch the
driver units or use the protective bags
to lift them. The Q M40 loudspeakers
are heavy - get assistance to lift them.
Q M40 Loudspeaker Installation
The Q M40 loudspeakers are intended to be
floor mounted only. We recommend you attach
the support base during the unpacking process
as in the diagram above, to avoid damage to the
loudspeaker. However, you may attach it after the
loudspeaker is unpacked, but you should protect
the loudspeaker from damage by placing it on
a soft cloth or similar. You must also take care to
avoid damaging the front grille and drive units.
Spikes are sharp. Exercise care! Never
place a spiked loudspeaker where it can
cause damage!
Always move your loudspeakers by
lifting them - never drag them!
Thread the spikes fitted with locking nuts half way
into the base and return the loudspeaker to the
upright position (If you have a wood or stone floor
push a spike cover over each spike before turning
the speaker upright). When the speaker is the right
way up, insert the Allen key into each rear spike from
the top and adjust all the spikes in and out until the
loudspeaker is level and stable.
7
EN
Publicité
