ensure safety and reliability, Before first use, please read the instruction carefully and
keep for further reference.
DESCRIPTION OF THE DEVICE
ASSEMBLE INSTRUCTION
-Installation of portable wheel (See the sketch map1);
1. Take out the heater, Put it on a smooth Solid tabletop or ground;
2. Take out foot plate;
3. Alignment two holes between plate and bottom of heater to install the plate, make
sure the screw are tightened fully;
-Installation of wall mounting (See the sketch map 3)
IMPORTANT:
Requirement of using area for wall-mounting type (See the sketch map 2)
sketch map 1
1. Wheel
4. Switch
2.Plate
5 Thermostat
3.Body